Starting compression issue
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Hey everyone, I just recently bought two quads as a bundle, they are both red cats one is a 110cc and the other a 200cc. I got the 110cc running perfect and I have no issues with that one. But the 200cc doesn't like to crank under load. What I mean by that is when the spark plug is installed the motor will turn over like once and then act like the battery doesn't have enough voltage to keep it going. But when I remove the spark plug the motor turns over with no problem. Its not a voltage issue, I just reclearenced the valves and they are in spec, the exhaust isn't plugged. Im lost and unsure what to do or check at this point. If anyone has suggestions or has experienced this problem please let me know.
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Alex71 has just had the same problem. Turned out to be the trigger coil wired backwards. However, have a read through this Coolster 125 slow cranking as if too much compression before doing anything.
Link doesn't seem to work so, Coolster thread is in the kids quads section of the forum.
Link doesn't seem to work so, Coolster thread is in the kids quads section of the forum.
Thread
Thread Starter
Forum
Replies
Last Post
adge_denkers
1) Engine problems..
3
11-29-2015 01:36 PM
Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)