SNOW MOBILES @ the dunes
#21
SNOW MOBILES @ the dunes
#23
SNOW MOBILES @ the dunes
<div class="FTQUOTE"><begin quote>Originally posted by: toofastmikey
I saw a video of a snowmobile racing a jetski on water. in a circle track!!!
The snowmobile started on land to get speed, then hauled ***.
the jet ski was faster in the turns, but the sled was faster in the straights because of all of the "traction" due to the big track.</end quote></div>
when the sleds sink, are they 100% ruined? how do they get them out?
I saw a video of a snowmobile racing a jetski on water. in a circle track!!!
The snowmobile started on land to get speed, then hauled ***.
the jet ski was faster in the turns, but the sled was faster in the straights because of all of the "traction" due to the big track.</end quote></div>
when the sleds sink, are they 100% ruined? how do they get them out?
#24
SNOW MOBILES @ the dunes
No they are not 100% ruined..............They have "PUDDLE JUMPS" here in Canada and they just need to get the engine kill switch off before it goes under so the engine don't take in so much water.........Drain and start them again.............Please note these sleds are done up just for this water racing........They also tie a empty jug with rope on them that will float when the sled goes down .......But with the puddle jumps......................They have guys set up on each side of the hole they cut in the ice to hook the skies just before the sled looses traction and any forward movement!!!...........Oh well some people enjoy this I guess!!!.....LOL......Caper...........
#25
SNOW MOBILES @ the dunes
Oh if there running open water on the lakes.......They need to hire a diver to attach the rope/cable to the sled before the salvage team lifts it out...!!!.........Also very costly to remove a truck or sled out of the water............The Dept. of Lands and forrests will not let you leave it there if they know about it!!!!..........Caper..............
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)