Hey i was just wondering what pressure i should run in my dirtbike paddle in the dunes, its a ktm 450exc, thanks guys

 

i was looking at the tire and the only thing i can find on the tire says 33 psi, is that right, it seems really high to me

 

No, that usually is to seat the bead, I run mine at 6-7psi on an XR600 throws one he$$ of a roost and you can beat the daylights out of it .

 

If you have at least 2 rimlocks on your rear tire 5psi + would be good.......But 33 is WAY TOO MUCH

 

thats what i was thinking, but it doesnt say 33 to seal the bead, it says on the tire thats the max load to run it at, i just put this new paddle on cause the bead tore on the last one, and im just scared the bead tore because i had it running to low, it was running at 8 when the bead broke on the old one, but 33 does seem really high