110cc Tao tao ran yesterday like a champ after new plug and gas. Air filter cleaned. Will turn over but does not start. Has spark. Kill switch not the issue. Used choke during start. Does not kick over to run. Any ideas. Plug seems wet with gas after I try to start.

 

does it have a teather on the back behind the seat? try pushing that in and see if that does it

 

It doesn't push in. I've messed around with it but no movement.

 

did you try unplugging it and pluging it back in i have had this issue with one of mine

 

well if you have fire to the plug that eliminates this issue

 

have you shot starting fluid in the carb if it starts after you "prime" it with starting fluid or a shot of gas will work this means your issue is the carb

 

I have disconnected it and reconnected a few times but no change. Its a little tethered **** on the back grab bar that comes apart correct?

 

yes this is correct but if you are getting spark to the plug this isnt the issue

 

you may have a clogged primary jet in your carb not allowing the proper amount of fuel in or a stuck float allowing to much fuel in