General Chat Ask for ATV help above in the Brand Discussions Area. Use this forum to discuss Life, Music, ETC. Or discuss pretty much anything BUT no political or religious threads. There's an area for that.

Loading / Unloading Enclosed Trailer - Unattatched

Thread Tools
 
Search this Thread
 
Old Feb 27, 2015 | 12:00 PM
  #1  
NLWarrior01's Avatar
Thread Starter
|
Pro Rider
Joined: Jul 2003
Posts: 1,859
Likes: 0
Default Loading / Unloading Enclosed Trailer - Unattatched

Hi guys, I have a question regarding safe loading / unloading.

My trailer is fairly large, 24' plus a 6' V-nose, steel framed. It doesn't have any stabilizer jacks.

What I'm wondering is, is the trailer heavy/stable enough to load ATV's on board without upsetting the trailer when not attached to the truck. It's parked rather close to my garage. See attached pics.

It's my wife who will be doing the loading as I'm away at work and she wants to start cleaning out the garage.

To be loaded are: 2015 Outty Max, this will go up front where the drive out door is. 2006 Sporstman 500, 2005 Predator 500 and a 2014 Outlaw 90.

What are your guys' thoughts / experiences?
 
Attached Thumbnails Loading / Unloading Enclosed Trailer - Unattatched-img_1139-2-.jpg   Loading / Unloading Enclosed Trailer - Unattatched-img_1126-1-.jpg  
Reply
Old Feb 27, 2015 | 12:28 PM
  #2  
MooseHenden's Avatar
Super Moderator
Well, golly JimBob!
15 Year Member
Joined: Aug 2006
Posts: 40,196
Likes: 55
Default

Looks heavy enough to me that it won't pop up on the trailer hitch end when you load the Outty. Once you get the Outty in the nose of the trailer I don't think the other quads will cause the front end to come up. Maybe try it while both of you are there. Just load the Outty. If it doesn't cause the front end of the trailer to come up it probably isn't going to be a problem.
 
Reply
Old Feb 27, 2015 | 12:45 PM
  #3  
quadsr4me's Avatar
Range Rover
Joined: Feb 2014
Posts: 181
Likes: 0
From: il/wi border
Default

Box crib the trailer's back end properly and you won't have to worry about the front end coming up. I've used cement blocks one on each side of the trailer while loading uncoupled to my tow vehicle in the past without issue.
 
Reply
Old Feb 27, 2015 | 03:16 PM
  #4  
jgar's Avatar
Extreme Pro Rider
Joined: Jun 2010
Posts: 2,971
Likes: 0
From: Gardner ma.
Default

You should be fine. If loading the first quad sketches you out. Lower the nose of the trailer using the jack.
 
Reply
Old Mar 2, 2015 | 07:52 PM
  #5  
woodsrider62's Avatar
Weekend Warrior
Joined: Feb 2015
Posts: 12
Likes: 0
From: South Jersey
Default

I would use cinder blocks or a mix of 6x6's or 4x4's under the back end of the trailer where the gate folds down. Don't forget to chock the wheels! Go slow and be safe
 
Reply
Old Mar 3, 2015 | 02:44 PM
  #6  
cjBeachBum's Avatar
Trailblazer
Joined: Jan 2015
Posts: 28
Likes: 0
Default

I use some cheep small adjustable jacks, just slide them under pull them up till the click as close to the bottom as possible. If I am doing a lot of in and out I will jack the front up a little till the rear of the trailer hits the jack stands.
 
Reply
Old Mar 3, 2015 | 02:59 PM
  #7  
quadsr4me's Avatar
Range Rover
Joined: Feb 2014
Posts: 181
Likes: 0
From: il/wi border
Default

I think the take away here is that there is no need to wonder, guess or eyeball whether the trailer is heavy enough. Properly supporting the trailer for loading/unloading while not coupled to a tow vehicle is probably going to be the safest method. Even if you don't have lumber, blocks, jacks, etc at your disposal, common household items laying around might even work...i.e., a stool, tool box, anything sturdy that doesn't have much give, etc...
 
Reply
Old Mar 3, 2015 | 08:43 PM
  #8  
mcghan's Avatar
Weekend Warrior
Joined: Mar 2015
Posts: 13
Likes: 0
Default

you are probably all right but i would still put something under the back of the trailer,better safe than someone getting hurt
 
Reply
Old Mar 4, 2015 | 08:04 AM
  #9  
woodsrider62's Avatar
Weekend Warrior
Joined: Feb 2015
Posts: 12
Likes: 0
From: South Jersey
Default

Originally Posted by quadsr4me
I think the take away here is that there is no need to wonder, guess or eyeball whether the trailer is heavy enough. Properly supporting the trailer for loading/unloading while not coupled to a tow vehicle is probably going to be the safest method. Even if you don't have lumber, blocks, jacks, etc at your disposal, common household items laying around might even work...i.e., a stool, tool box, anything sturdy that doesn't have much give, etc...
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Johnny Mac
Trailers, Toy Haulers, Motorhomes.
60
Dec 14, 2019 06:13 PM
dannytas
Introduce Yourself
10
Sep 26, 2017 06:31 PM
badgerboy1
Trailers, Toy Haulers, Motorhomes.
5
Sep 26, 2017 06:11 PM
Dewhound
Polaris
11
Apr 20, 2017 02:25 PM
MikeyBoyesq
ATV Racing
0
Sep 7, 2015 10:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:21 AM.