what would it take to make a 450s a 650s
Jan 29, 2000 | 02:49 PM
#1
Thread Starter
|
Trailblazer
Joined: Jan 2000
Posts: 30
Likes: 0
I read a article in the high lifter Web last night where a guy took a 400 Honda and made it a 550. how much would this cost? would it be worth the money? I bet it would be one mean muddin machine. what do you'll think???
Jan 30, 2000 | 12:06 AM
#2
Pro Rider
Joined: Sep 1999
Posts: 1,724
Likes: 0
You would need a different jug. It would be impossible to stork it more than Scott has, because he had to trim a gasket because the crank was hitting it. I think he used the Highlifter big bore kit for his jug.
I bet you could go bigger but not 100 cc's more than he has. Besides he can stand his 550 on its back rack now, and thats with tires that add 60 lbs each on the front.
------------------
Arctic Cat 500, Don't worry I'll pull you out.
I bet you could go bigger but not 100 cc's more than he has. Besides he can stand his 550 on its back rack now, and thats with tires that add 60 lbs each on the front.
------------------
Arctic Cat 500, Don't worry I'll pull you out.
Jan 30, 2000 | 10:56 AM
#3
Trailblazer
Joined: Aug 1999
Posts: 41
Likes: 0
Hey TRICLAW!
We started talking about that some over in the High Lifter Forums. I, also, would be interested in a 500 or 550 kit. Not that the 450 doesn't have enough power already, but as the old saying goes "You can't have enough power!"
"KEEP THE MUD SLINGIN'!!!"
SwampMonster
[This message has been edited by SwampMonster (edited 01-30-2000).]
We started talking about that some over in the High Lifter Forums. I, also, would be interested in a 500 or 550 kit. Not that the 450 doesn't have enough power already, but as the old saying goes "You can't have enough power!"
"KEEP THE MUD SLINGIN'!!!"
SwampMonster
[This message has been edited by SwampMonster (edited 01-30-2000).]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)