My Foreman has been wrecked. The left front wheel is leaning in. I cannot find the bent component. All measurements comparing to the right side seem to be correct. A bent frame or A arm would only have to be 1/8" off to cause the wheel to lean as it is. Is there a source for frame measurements.
This would save the cost of alot of parts changing as the dealer suggested.

Thanks,

Jeff

 

Is your rim warped?

 

hello

take a very good look at the upper and lower ball joints and the spindle . also measure the control arms from the mounting point on the frame to the bottom of the balljoint fixed end and compare them side to side . look for cracked paint on the frame , control arms and spindle .. hope this helps