440 Less power w/stage 2 cam??
#11
440 Less power w/stage 2 cam??
for checking the needle and mainjet here is what i do. warm bike up to full temp. take it out and run it through the gears and stay right around 1/2 throttle all the way through the gears. you can even stay at 1/2 throttle in 5th for a while if you want. while going at 1/2 throttle, pull in the clutch and shut it off quickly. check the plug. do the same thing for the mainjet, but run the bike at full throttle and not 1/2. what i look for on the plug: i like it when i see a color change right on the bend of the plug. it will usually change from a gray to a tan right on the bend with the fuel i use. by the way, a cam shouldn't change the jetting.
Thread
Thread Starter
Forum
Replies
Last Post
MeadowlarkFarm
Test Your Signatures (sigs) Here!
3
11-27-2019 08:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)