250R throttle help??
#11
#12
250R throttle help??
no, if a cable is a little too long you adjust it with the carb top and the adjustment on the throttle housing. If its too "short" it may not be short at all, just hanging up in the cable housing causing it not to slide freely. If its a spring they do wear out sometimes and that could be a problem as well
If in your case its idling too high the sticky cable can cause the slide to be open a little more then it should. Granted i cant hear just how high its idling but its just a theory. If the spring is bad it just wont have enough strength to close the slide
If in your case its idling too high the sticky cable can cause the slide to be open a little more then it should. Granted i cant hear just how high its idling but its just a theory. If the spring is bad it just wont have enough strength to close the slide
#13
#16
250R throttle help??
maybe I go this backwards but my manual says the choke is the air screw and the screw on the body is the idle screw?? anyways I got the choke one at 1 & 7/8's turns out. I am also wondering if it might be my needle? Also how does the needle affect it being rivh or lean or does it??
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Alex Rodak
Introduce Yourself
0
09-11-2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)