ruby trans slip- texmud? dzzy? specta?anybody
#1
went for a little ride saturday the last 6 or so km. tranny started to slip in higher revs. pump? clutches?could u guys help me out. thanx . i appreciate ur knowledge.
#2
I can be very little help, never had a problem with mine.
I do think the starting place is to measure the oil pressure. Remove the oil galley sealing bolt on the left side of the front crankcase cover. It is a black bolt and takes an allen wrench to undo. At 1400 rpm it should have 22 psi and at 5000 rpm it should have 116 psi.
If its low, it might be time to contact your dealer.
Could be the clutch?
Wish I could be more help, but I do think that is where you need to start.
I do think the starting place is to measure the oil pressure. Remove the oil galley sealing bolt on the left side of the front crankcase cover. It is a black bolt and takes an allen wrench to undo. At 1400 rpm it should have 22 psi and at 5000 rpm it should have 116 psi.
If its low, it might be time to contact your dealer.
Could be the clutch?
Wish I could be more help, but I do think that is where you need to start.
Thread
Thread Starter
Forum
Replies
Last Post
lovinhonda
Honda
11
Nov 2, 2000 10:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




