I have a 400EX how do i install it. all the paper said that came with the kill switch . Connect long wire to positive coil wire, short wire to ground wire. I looked at my wires coming out of the starter.follow it to where they connect to a plug. but there was like 4 or 5 wires. What one is the positive wire. IM sure the ground was the black wire. Any help installing this would be great

 

Kill Switch... Kill Switch.. Aw yes... The Pro Design Kill Switch. This is what I did... Take the ground wire and ground it anywhere on the bike. I used a ring connector and grounded it where the oil cooler mounts to the frame..(The best ground on any DC system is the frame of the vehicle) Positive Wire - I took that wire and spliced into the black wire with yellow stripe that comes out of the coil. (the cylindrical object halfway inbetween the quad, where the spark plug wire goes, just follow that up)... There will be a b/y (black/yellow stripe) wire that comes out of the coil by itself... Splice into this one... That is the same wire that kills the quad with the stock kill switch...