wiring new starter button
#1
#3
i have mine hooked up like this..
It works good, i can't explain how i did it from a normal wiring harness because mine is far from normal thanks to the pervious owner.i will try.
to start the quad you have to touch the 3 black wires together with a yellow wire with a red tracer. Thats all the info i have!
It works good, i can't explain how i did it from a normal wiring harness because mine is far from normal thanks to the pervious owner.i will try.
to start the quad you have to touch the 3 black wires together with a yellow wire with a red tracer. Thats all the info i have!
#4
#6
Darn THat was quick... Alright 1st I used a CR Push kill switch as the start button (you need to get one that has both wires going into the switch not one that screws to ground). It looks sweet.. I then got 2 push button on/off switches that I mounted the right front for the stock kill switch and clutch switch (since I use a CR250 cluch I moved the two wires to this switch so I can turn it off and on..) On the Left side I mounted 2 rocker switches for the light and high/low beam... All together it looks sweet. I will take pics tomarrow and put them up on the web site so you can get a better look.
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)