Does anyone know if the stock Rincon wheels will fit on a 2001 Rancher? I do not know if the front and rear offset is the same on the two machines.

 

No the rear wheels do not have the same offest, but I have seen where they have just turned them around so the valve steam is to the inside. I cann't say I would do this.

 

No, the off-sets are different, on the Rancher or Foremans the front are 2+5 and the back are 5+2.
That means that the back rims are "deeper than the front.
The Rincon off-sets are the same 2+5 & 2+5 because onf the independent rear suspension.
I've got a set on AMS Aluminum rims and AMS Blackwidow tires off of a Rincon, all
you need to do is buy the SPACER kit for the rear wheels to move them out 1" or 2' inches.
D0 a search for ATV Wheel spacers.

 

no they will not fit because of there off set

 

Yes, they will fit. No the off sets are different.
You may notice a wider stance in the front but the rear wheels will be set in and not stick out as much. This is where the spacers for the rear come into play. They will put the rear wheels back out to where the original wheel base was.