Honda semi-automatic transmissions
#1
Honda semi-automatic transmissions
Anyone on here know alot about the honda semi automatic transmissions that were in the 80's era atc's. Trying to get my hands on one because Im building a mini baja vehicle. Weve run polaris CVT's in the past but are looking in a different direction for tranny. My motor is small, 10hp, 305cc. I heard these honda semi-auto put alot of stress on the motor. Anyway, im looking for further info on this specific kind of tranny, any help would be greatly appreciated.
#2
Honda semi-automatic transmissions
what would be a good transmission to mate with a briggs and stratton 10hp 305cc motor, i know ill have to modify the tranny to make it work but im looking for any suggestions, right now im looking at a couple from a '83 honda atc 185cc and 200cc, both of them are 4-speeds i think.
#3
#7
Trending Topics
#8
Honda semi-automatic transmissions
typically a centrigal clutch off the crankshaft that turns a multiplate clutch on transmission input shaft. 2 stage foot shift (only press once - 1st 1/2 of motion pushes plates of multiplate apart, 2nd 1/2 rotates shift drum to change gear). So the cent. clutch handles disengagement at idle, but when revving higher than the centrifugal clutch's engagement - the shifter presses the multiplate apart, then shifts. You can find a exploded view if you search around enough. Search for autoclutch on the web
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)