I plan to get a 416 kit and exhaust, but i was wondering which cam would help the best. I ride mostly woods so i don't want a race style but i dont' want to loose top end either. Thanks for the help.

 

I have news for you almost all atv cams are ground by WebCam. Including White Brothers.
I called Laurie and she recommended their 450-451 grind it is a great all round cam. Lrd Performance also runs this cam on almost all their modded engines. The only needed mod you need to do is to get your rockers hardfaced. The stock springs are acceptable. I run this cam in the dunes and at 11000 ft on wooded trails.

 

GT Thunder has their cams custom ground, but I don't know who does the grinding.

 

I totally agree with Air. Get the 450/451 grind from Web-Cam. You don't have to get the hard-faced rockers though. Web-cam recommends getting them done, but you don't "have-to" get them done. it will cost you another $200 or so to get your rockers hard-faced. I couldn't afford the extra $200-$250 dollars at the time, so i opted not to get them done. I know alot of other people on the forum didn't get this done either, and i haven't really heard of any problems so far. If you have the extra money, i'd get the rockers hard-faced, if your a little short on cash just get the cam. We're not all rich.