200SX QUAD INFO ON IT
#11
I've tipped mine upsidedown many of times...in a creek, I do wheelies with it alot because it's light...and mine seems to get stuck in mud too much, it's probably the cheap tires I put on it.
mudslinger-Do you have any pictures of your 200sx??...I'd like to see it with the mud tires on it.
mudslinger-Do you have any pictures of your 200sx??...I'd like to see it with the mud tires on it.
#12
#13
I have oil leaking out of my 200SX engine now...it's all around the top of the head(the seem above the spark plug) the threads on the spark plug has oil on it. What's wrong??...over reving maybe??
The '86 200SX looks to ugly compared to the '87 models like mine.....even compare mine to pudding's pics. I like the white plastic better. no offence pudding, or anyone else.
The '86 200SX looks to ugly compared to the '87 models like mine.....even compare mine to pudding's pics. I like the white plastic better. no offence pudding, or anyone else.
#15
lol.....i have never actually seen one with white plastics....(only your photos ATV_MAN....how are the clips on the plastics round the tank connecting to the fenders still holding up?....they usually break pretty easy
.....engine......may need a head gasket kit.....do a cam chain while the head is off..(port and polish and high comp piston would be nice too ....if money grows on trees that is!)...this will fix the external leek
......i did this not so long ago on my 250sx 3 wheeler...(not the mods though!)..she was dropping oil on the exhaustpipe
.....how did ya get on with the axle bearings in the back end?.....is she sweet now?
.....engine......may need a head gasket kit.....do a cam chain while the head is off..(port and polish and high comp piston would be nice too ....if money grows on trees that is!)...this will fix the external leek
......i did this not so long ago on my 250sx 3 wheeler...(not the mods though!)..she was dropping oil on the exhaustpipe
.....how did ya get on with the axle bearings in the back end?.....is she sweet now?
#16
I never got my rear bearings yet...it's still sitting in the garage all apart.....Who do you think I am, Bill Gates??....I can't afford all that!!...LOL, I got $50 in my wallet...LOL, I have to borrow money from my parents to order the bearings....my plastic is held under the seat by bolts and one side is cracked.
I need alot of parts for my 200SX like...new spark plug, it's very black(any suggestions on a good one??), new gaskets, rear bearings & seals, new screws for brake resivoir(from trying to bleed them so much they stripped)
My 200SX seems too under powered...because anyone remember I had a race with a 3004X4 and I lost by alot, and you all said I should have beat or stayed close with it.(he has no mods for it either) What could it be??....can you make the gas mixture more rich??...is their a screw to adjust the richness??
(Sorry for typing so much)
I need alot of parts for my 200SX like...new spark plug, it's very black(any suggestions on a good one??), new gaskets, rear bearings & seals, new screws for brake resivoir(from trying to bleed them so much they stripped)
My 200SX seems too under powered...because anyone remember I had a race with a 3004X4 and I lost by alot, and you all said I should have beat or stayed close with it.(he has no mods for it either) What could it be??....can you make the gas mixture more rich??...is their a screw to adjust the richness??
(Sorry for typing so much)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)