Does any one know where i can get pro x piston rings? I'm rebuilding the top end on my machine and its got a pro x piston in it . when i went to there site it said that the their rings can be used as stock replacement so i was wondering if i could put stock honda rings into it? my piston is 74mm which im pretty sure is stock. any help would be apreciated.

 

You can buy rings and pistons from rockymountainatvmc.com or denniskirk.com. You can use different rings than pro-x you know.

 

someone else told me that i had to be brand specific. so your saying that any brand rings will work?

 

Not exactly. Some after market companies design there pistons to use there own rings. By making the rings thicker/thiner. I would go with a matching set of rings from pro-x. I am surprised that the piston came with out the rings and wrist pin needed.

 

when i opened up the top end thats the piston that was in there. i bought the machine used. i read on the pro-x site that their rings will work on a stock piston so i was wondering if i can use stock honda rings

 

<div class="FTQUOTE"><begin quote>Originally posted by: Thompson creations

when i opened up the top end thats the piston that was in there. i bought the machine used. i read on the pro-x site that their rings will work on a stock piston so i was wondering if i can use stock honda rings</end quote></div>

Stock rings would probably work just fine.