Tiny Tach for Recon
#22
#23
#24
Don't have pix, but can describe mounting location.
I bought a "Tiny Tach" from Cabela's it was $40.00 and I think "one size fits all". Only one mdl., I think.
This is for a '01 Recon. I mounted the tach on the black panel that covers the top of the gas tank. I came back(toward rider) about 2" from fuel filler neck, and centered it on this panel. The biggest pain in the butt is getting the cover panel off the bike, as you have to fasten tach from the backside of this panel. If I remember correctly, the side panels(side of fuel tank) have to come most of the way off to remove(un-hook) the top cover. The wiring is VERY simple, as the unit is self-powered and the pick-up is inductive. It'll take about 5 min. to wire up! 1 ground wire and then you wrap the inductive cable(5 turns? See Instructions) around the spark plug wire....your done! It should take about 1 1/2 hr. for you to do a nice install. I used stainless steel fasteners and nyloc nuts for my install. GOOD LUCK, Mike.
I bought a "Tiny Tach" from Cabela's it was $40.00 and I think "one size fits all". Only one mdl., I think.
This is for a '01 Recon. I mounted the tach on the black panel that covers the top of the gas tank. I came back(toward rider) about 2" from fuel filler neck, and centered it on this panel. The biggest pain in the butt is getting the cover panel off the bike, as you have to fasten tach from the backside of this panel. If I remember correctly, the side panels(side of fuel tank) have to come most of the way off to remove(un-hook) the top cover. The wiring is VERY simple, as the unit is self-powered and the pick-up is inductive. It'll take about 5 min. to wire up! 1 ground wire and then you wrap the inductive cable(5 turns? See Instructions) around the spark plug wire....your done! It should take about 1 1/2 hr. for you to do a nice install. I used stainless steel fasteners and nyloc nuts for my install. GOOD LUCK, Mike.
#30
Just pickup a used 15 hrs this recon for wife for $2200.00 WHAT do you guys think aboiut price?
I feel it was more then fair. Nice litte quad handles great .Hope I dont start using it more then my 650 prairie.
Few question about 2001 Recon
Where do I find the VIN ## on the frame?
How does this tech work?
Where do you hook wires to for tech?
How much and what kind of motor oil do I use in the quad?
Read about the snokel have anyone add the 1 1/2 hose to it?
How did it perform after?
i wait reply
I feel it was more then fair. Nice litte quad handles great .Hope I dont start using it more then my 650 prairie.
Few question about 2001 Recon
Where do I find the VIN ## on the frame?
How does this tech work?
Where do you hook wires to for tech?
How much and what kind of motor oil do I use in the quad?
Read about the snokel have anyone add the 1 1/2 hose to it?
How did it perform after?
i wait reply