Honda Discussions about Honda ATVs.

03 rancher 350 carb help PIC

Thread Tools
 
Search this Thread
 
  #1  
Old 08-19-2009, 05:10 PM
hoytultratec's Avatar
Pro Rider
Thread Starter
Join Date: Apr 2006
Location: Wi
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default 03 rancher 350 carb help PIC

this view is from the top lower right hand side of the pic there is a black nipple, is there a hose that suppose to go there? I found a black rubber thing under the machine that slides on it perfectly but i had to leave during the process and cant remember pulling a hose off there. and cant find a lose piece tubing anywhere.

thanks
 
Attached Thumbnails 03 rancher 350 carb help PIC-carb.jpg  
  #2  
Old 08-19-2009, 07:44 PM
hoytultratec's Avatar
Pro Rider
Thread Starter
Join Date: Apr 2006
Location: Wi
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

anyone got a rancher?
 
  #3  
Old 08-20-2009, 05:31 AM
hoytultratec's Avatar
Pro Rider
Thread Starter
Join Date: Apr 2006
Location: Wi
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

anyone?anyone?...someone gots to have a rancher?
 
  #4  
Old 08-20-2009, 07:13 AM
1 Bad Honda's Avatar
Weekend Warrior
Join Date: Aug 2009
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

I will look at mine after work today and reply if nobody has said anything by then!
 
  #5  
Old 08-20-2009, 08:42 AM
ddrumman2004's Avatar
Pro Rider
Join Date: Apr 2005
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Default

From a picture in the Clymer manual I have on the Rancher, it shows a hose going to that nipple from what I can tell. It appears to run back towards the engine and not the airbox.
I don't own my Rancher anymore or I would take a picture for you.
 
  #6  
Old 08-20-2009, 04:17 PM
hoytultratec's Avatar
Pro Rider
Thread Starter
Join Date: Apr 2006
Location: Wi
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1 Bad Honda
I will look at mine after work today and reply if nobody has said anything by then!

that would be great i just need to know where the tube goes.still didnt find a lose one.

thanks
 
  #7  
Old 08-20-2009, 04:46 PM
hoytultratec's Avatar
Pro Rider
Thread Starter
Join Date: Apr 2006
Location: Wi
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

all right i got something hooked up wrong found a loose hose its the one between the throttle cable and the choke hook up on the carb, it isnt long enough to reach the nipple, so im assuming i got something screwed up at thay y connector next to the frame above the carb.
 
  #8  
Old 08-20-2009, 04:53 PM
hoytultratec's Avatar
Pro Rider
Thread Starter
Join Date: Apr 2006
Location: Wi
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by hoytultratec
all right i got something hooked up wrong found a loose hose its the one between the throttle cable and the choke hook up on the carb, it isnt long enough to reach the nipple, so im assuming i got something screwed up at thay y connector next to the frame above the carb.
actually just rerouted the tube and it fits and looks right.....all i need is verification thats were that tube goes im good to go. atleast the tube size is the correct size for the nipple.
 
  #9  
Old 08-20-2009, 05:33 PM
1badhonda jr.'s Avatar
Weekend Warrior
Join Date: Aug 2009
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

lookin at the pic, the nipple on the right should have a short hose that hooks to the nipple on the front of the carb that sticks straight up also it looks like u already have a hose connected to the top one
 
  #10  
Old 08-20-2009, 05:46 PM
hoytultratec's Avatar
Pro Rider
Thread Starter
Join Date: Apr 2006
Location: Wi
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1badhonda jr.
lookin at the pic, the nipple on the right should have a short hose that hooks to the nipple on the front of the carb that sticks straight up also it looks like u already have a hose connected to the top one
sent you a p.m

thanks
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GregM
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
7
03-06-2018 06:53 AM
Aitch
Kawasaki
1
07-21-2015 09:40 PM
Scottma518
Honda
4
07-16-2015 09:19 PM
Robbbb55
CAN-AM (BRP) Ask an Expert!
0
07-08-2015 02:16 PM
Robbbb55
CAN-AM (BRP)
0
07-08-2015 02:11 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 03 rancher 350 carb help PIC



All times are GMT -5. The time now is 11:26 AM.