02 rubicon transmission
#1
02 rubicon transmission
today i cleaned my carb because i had a issue with it yesterday.after cleaned it started great and runs good now. but when i took it for a ride.i put it in gear and heard a i guess ud say a clickking noise like a gearwas not grabbing but a little gas good to go. so i looked in the oil which i had change 3 day b4 this and it was like a qt over full. and i only put 5.2qts in it. did i put to much ?so i looked and smelled it kida thin.so i changed it but the only thing they had was regular moter oil so i put it in.will this hurt it.i change the oil about every 150 miles i know thats very often.but i use the old in my car that leaks oil...lol..oh after i changed it the noise went away.should i off it or u think its ok just some how gas got init?thanks for ur help.
#2
#4
The Rubicon is a dry sump design. To get an accurate oil reading you have to let the quad idle for around 4 or 5 minutes, and sit for two minutes.
If after cleaning the carb you ended up with a higher idle speed that needs to be adjusted.
Lastly, I would for sure run oil rated API SG or better and JASO MA, for motorcycles with a wet clutch design.
If after cleaning the carb you ended up with a higher idle speed that needs to be adjusted.
Lastly, I would for sure run oil rated API SG or better and JASO MA, for motorcycles with a wet clutch design.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
02, 2001, atv, foam, gas, honda, leaked, noise, ratcheting, rubicon, sea, subtransmission, transmision, transmission, wheel
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)