Need help with parking brake block off
#1
#2
#3
#4
I have White Bros. block offs on both my R's. I just took the old stuff off, put the new plate on with a little thread-lock on the bolts. No leaks or any problems. You could put the "O" ring in the space provided in the block off. If you use gasket sealer, use very little.
Try bleeding your brake. Pump them up, crack open the valve on the caliper while you push slowly down on the brake peddle. When you have the peddle all the way down, close the valve. Don't let the peddle back up with the valve open or you will suck air into your line. Do this several times until you get all the air out. Keep the reservoir topped off. This should fix your problem.
Try bleeding your brake. Pump them up, crack open the valve on the caliper while you push slowly down on the brake peddle. When you have the peddle all the way down, close the valve. Don't let the peddle back up with the valve open or you will suck air into your line. Do this several times until you get all the air out. Keep the reservoir topped off. This should fix your problem.
#5
Thread
Thread Starter
Forum
Replies
Last Post
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
0
09-07-2015 03:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)