Honda Discussions about Honda ATVs.

Possible engine mods 400x

Thread Tools
 
Search this Thread
 
  #1  
Old 11-07-2013, 03:05 PM
Den_Con's Avatar
Weekend Warrior
Thread Starter
Join Date: Nov 2013
Location: IDAHO
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Possible engine mods 400x

Hello everyone, Im new to the forum and looking for some ideas. I have a 400x and was wanting a little more bottom end and mid range power. My riding is trail riding and hill climbs. Here is what I currently have done, 450r front shocks, uni filter, ehs lid, lexx slip on, and rejetted. I was thinking about a hotcam stage 1 or 2, but not really knowing how far I want to tear into the engine and lose reliability. Will the cam wake up the 400 at all? Any ideas or suggestions? 416 bore?
Thanks
 
  #2  
Old 11-07-2013, 04:58 PM
dragracer400's Avatar
Weekend Warrior
Join Date: Oct 2013
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

stage one cam will be more aggressive for the bottom end and stage 2 is for mid range. Im running stage 2 and its pretty good. Boring it wont really do to much unless you are planning on doing other mods. you can always get a higher comp. piston like a 11:1. If your looking for bottom end and mid your best if probably to let it breathe as much as possible and also look into a 04-05 450r carb.
 
  #3  
Old 11-07-2013, 09:13 PM
Den_Con's Avatar
Weekend Warrior
Thread Starter
Join Date: Nov 2013
Location: IDAHO
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Is there a lot of mods that have to be done to get that carb to fit? Do you think a 450r carb and stage one cam would make a noticeable difference in power?
 
  #4  
Old 11-08-2013, 07:55 AM
LT80's Avatar
Extreme Pro Rider
LT80 Expert
Join Date: Mar 2001
Posts: 8,342
Received 32 Likes on 31 Posts
Default

FYI: your motor is plenty tough. Heavily modded 400's seem to last forever with the exception of going too big of bore (440).
My daughter raced a 416cc. Never a problem.
 
  #5  
Old 11-08-2013, 08:32 AM
Den_Con's Avatar
Weekend Warrior
Thread Starter
Join Date: Nov 2013
Location: IDAHO
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Would I see power gains and would it be worth it if I added a 11:1 piston, mild P+P, and stage 1 cam with the stock bore?
 
  #6  
Old 11-08-2013, 09:24 AM
LT80's Avatar
Extreme Pro Rider
LT80 Expert
Join Date: Mar 2001
Posts: 8,342
Received 32 Likes on 31 Posts
Default

Yes!
Bore don't mean that much.
I'd recommend calling reputable motor builders and get their opinions and prices.
Baldwin Motorsports
Hetrick Racing
TC Racing Engines
Mickey Dulap's "Four Stroke Tech".
GT Thunder
And the ever famous and undisputed 4 stroke king~ Curtis Sparks!
All have built way many and can send you a complete kit that can be bolted and go.
There are tons of other shops but these all are well known and very reputable.
No offence to anyone I didn't mention.
 
  #7  
Old 11-11-2013, 08:17 PM
MarioWeldingInc's Avatar
Trailblazer
Join Date: May 2011
Location: Hazel Green, Alabama
Posts: 98
Likes: 0
Received 1 Like on 1 Post
Default

The biggest boost in bottom end is a big bore kit. I have a 500cc on my 400ex and it has gobs of low end. To feel the effects on the top end you need to open it up..bigger carb full exhaust etc. But for trail riding its a rocket! also its a 11:1 compression ratio. its ultra reliable and uses pump gas and no over heating
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cole Hadden
Polaris
22
08-24-2020 11:11 PM
jeepwheelin02
1) Engine problems..
5
07-18-2020 06:42 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
07-22-2015 05:00 AM
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-18-2015 07:20 PM
Dirtbikemike1
General Chat
1
07-11-2015 03:36 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Possible engine mods 400x



All times are GMT -5. The time now is 06:51 PM.