hello i have an axle problem with the lock nut that hold's the brake disc hub in place i use to be able to tightin it and now i can't at all i think maybe i poped a thread or something on the smaller nut and tightin's ageinest the brake hub since iv never had anything like this happen to me in my 8 year's in the sport and my manual fail's to give any useful info on the subject i look to my brother's and sister's of the sport for help.....please! im lost

paul

 

o yeah stock axle thanks[img]i/expressions/face-icon-small-smile.gif[/img]

 

Well, you might've stripped your nut.. I'm not familiar with what you're talking about.. So if you can, just get a new nut. Ronnies should carry the part that you need. If you cannot take the nut off, take your rotor, with the bolt and nut, to a machine shop, and tell them to drill and tap it. Most machine shops have only standard taps, so you would be forced to use a 1/2" or a 5/8" wrench(DARN) You could always take it to the shop and ask them what to do... But if you can, do all your work yourself. It will be better/cheaper in the long run.

 

I had the same problem with my 300ex .. I just went out and bought a new nut and it solved the problem. It cost me ... $16 canadian for a stock one.

 

thanks banshee...yea i know my way around quad's pretty well i don't think i have any tap's that big for it the main lock nut look's to be ok it's just the jam nut on it and i guess ill have to order another one and thank u to ex master