I finally got everything done.A little more work than i expected.
new picture should be better.

 

The next ROLL could be expensive ..watta pay for it ?

 

you know it!!! $165 but it looks good. pain in the rear to install.

 

How come ?I have not worked 400's much ,..is this because of hood or machine ??

 

Well, it did not come with any type of instructions.All i could do was look at magazine pictures etc.I cut off the headlight and then took it from there.There's not too many racers around here to get help from,much less a local shop.I got some tips from the forum's etc. but everyone said to cut the nose in 1/2 ? I was'nt going to cut more than i needed so i did'nt.I will post some new pic's tonight.click here for pic

 

looks good !

 

i think I HAVE GOT MY SITE FIGURED OUT.TRY THIS.
GO TO MY SITE

bare with me, i am new to this computer thing!

 

Hey man, looks good. Could you give me the rundown on the installation? I sold my hood(Quad Tech smooth) for $100 installed, and I wanna make sure I do it right. Thanks!

 

I first took out the head lights etc. Then with my trusty jig saw i trimmed out the head light mounting area. Don't cut out much,lay the hood in place and gauge how much needs to be removed.I was confused at first because the hood didn't come to the end of the stock nose area, but after veiwing web sites and magazines i trimmed the nose off the stock front to match the new hood(i did this after bolting the hood in place)then i re-cut the fenders to blend with the new nose.When you first start out,it may seem that the hood is the wrong size or shape, but if you go slow,measure twice cut once,you should'nt have much problems. A few post before i listed a pic,try there to see how it looks!