Originally posted by: Loster666
The angle sensor is easily tested with a multimeter!
Get the resistance of the sensor in the Up - Neutral and Down position ...
It should read a resistance in the Kohm range (I think) ... and it should read a different resistance on the different position.

Or maybe you really have a mechanical problem ! ...
But I have a Foreman, I don't know if it's exactly the same thing ..

Just tell me your resitance values, I'll check in my repair book to compare.

Also, remove the shifter cover and see if there is no water, dust, or anything strange in there, wash it and put a new oring if it is
broken, wash the gears and put a good grease in there, I've put white grease on the gears and have no trouble ...
Oh, and maybe your shifter motor brushes are bad .... could be a ton of things . .