About a month ago I came across a '94 400 Bayou 4x4 and I need to adjust the clutch on this. On the right side case I have taken the black plastic cover plate off and there are 2 bolts under it. The one on the right I have loosen the nut and turned the screw to the right to I get pressure and then back 1/4 turn and tighten the nut. But, I tried this with the other bolt on the left but it doesn't work the same. What do I do and did I do the bolt on the right correct? Thanks for the help in avance. Tried a search but came up empty.