kaw 450 stalls intermitently after it gets wet
Mar 3, 2004 | 11:40 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Mar 2004
Posts: 1
Likes: 0
kaw 450 stalls intermitently after it gets wet
go through water at speed and within a few minuets it'l die. after a while it'l start up and go again then die again. it will repeat this as long as i continue to ride. if i go out and don't get it wet it'l runs great. i asume it's electrical but i don't know to much about bike ignitions any thoughts?
Mar 4, 2004 | 12:02 AM
#2
Pro Rider
Joined: Feb 2004
Posts: 250
Likes: 0
kaw 450 stalls intermitently after it gets wet
I would clean and dry connections at coil/cdi and plug wire and fill with silicone dielectric grease.(most any auto parts store) . Also check your airbox for water intrusion.(clamps, lid, etc.)
Mar 4, 2004 | 12:47 AM
#3
Pro Rider
Joined: Dec 2003
Posts: 599
Likes: 0
kaw 450 stalls intermitently after it gets wet
Originally posted by: miniguy
go through water at speed and within a few minuets it'l die. after a while it'l start up and go again then die again. it will repeat this as long as i continue to ride. if i go out and don't get it wet it'l runs great. i asume it's electrical but i don't know to much about bike ignitions any thoughts?
go through water at speed and within a few minuets it'l die. after a while it'l start up and go again then die again. it will repeat this as long as i continue to ride. if i go out and don't get it wet it'l runs great. i asume it's electrical but i don't know to much about bike ignitions any thoughts?
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
