what are some clutch kit upgrades that you guys are using. anyone used barnett?

 

well i use the k&g factory clutch kit its very good and durable.I didn't know barnett made one for the lakota,but anyways k&g and barnett clutches are pretty close to the same.

 

Where did you get the K&G? I can't find it anywhere (local dealers or on the net). Do you have the number of the place you got it? And if not, you think I should go with the barnett? It's costing me about $80. for the complete set.

 

BUMP

 

I use the KG kit as well. The fiber plates cost aroung $30 and the springs were about $10. My local dealer gets them from Parts Unlimited. I found the best combination of springs to be use 2 of the stock springs and 2 of the KG heavy duty springs. Keeps the clutch from being too stiff. Also, the springs are the same as the 300ex and 350x clutch springs.

 

First of all, thanks for the response guys. Kawasaki98, where could I find a way to contact parts unlimited. I tried using www.partsunlimited.com, however that wasn't it. Now when you said $40. was that for both sprins and plates. Because as I stated before, the barnett is costing me $80. Do you guys even know much about barnett? If I can't find the KG would you recommend me getting the Barnett?

 

Yes, $40 will cover the cost of the springs and fiber plates.



use this to locate a dealer close to you.Parts-Unlimited.com

 

Thanks for the website. I actually found one near my house, hopefully I can get the kit. [img]i/expressions/face-icon-small-smile.gif[/img]([img]i/expressions/face-icon-small-blush.gif[/img][img]i/expressions/face-icon-small-disgusted.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-disgusted.gif[/img]

 

Good Luck.