V-Force tie rod ends.
#1
#2
V-Force tie rod ends.
Use the Honda EX400 ends...Tie-rods from Diamond G...you'll not have any problems after that. Check your steering stem that the ends didn't egg out the openning. We found that to be in issue on mine at the 12 hour. I had an inner tie-rod go bad, replaced it with a new one only to find it still had some slop where the old inner tie-rod end had wore on it...
#3
V-Force tie rod ends.
I was told about some on rockymountainatv.com Tusk brand for 400ex. I just noticed I needed an inner one also. My V is only 7 months old I think I have something else wrong. How old is your V??? Mine has very little slack but noticeable. How much do your ends move around?? Also how did you notice they were worn out?? Sorry for all the questions. Thanks
#4
V-Force tie rod ends.
Ckill...I bought my V in March of 04. Bought in on a Saturday and raced it on Sunday. I have put 2 hare scrambles on it, 7 MX races and the 12 hour last weekend. I bent 3 sets of stock tie-rods, enough that I got mad and started making the replacement ones that Diamond G now carries. I'm guessing I had about an inch of play in one wheel...even after we replaced the inner end with a new one we still had slop because it wore the stem making the opening a little larger.
#5
V-Force tie rod ends.
Ckill, I got my V last April, this is my second set of inners and one outer. I beat it down alot of rocky trails and don't really feel let down by it, I just wanted better ones. They just feel sloppy in the steering when they go.
Thanks to an anonymous Brian who fielded a phone call from a stranger to help me out with this.
Thanks to an anonymous Brian who fielded a phone call from a stranger to help me out with this.
#6
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)