well i broke the tie rod end on bf i've heard 400 ex tie rods work how bout 400ex ends on stock sleave also i see rockie mountain has complete 400ex rods for $89 how are they thanks vern

 

save yourself some time and give yourself some peace of mind and get a set of Diamond G racing tie-rods and tie-rod ends. i didnt have mine break but i've heard alot of people having problems with them so i bought a set, i've ridden it hard since and havnt had any trouble. the rods and ends are top notch, very strong.

 

grizzkiller,

Where do you get Diamond G tie rods and tie rod ends and how much do they cost?

 

they have a website. www.diamondgracing.com their phone# is 714-299-3865. the rods are $79 and the ends are $89. a little high but i dont think you will ever buy another pair. they come in a bunch of different colors powdercoated. they have pics on their website.

 

grizkiller,

Thanks, I just looked at the web page. they do indeed look robust. I just might need to set up with some.

 

well i just ordered a set of tusk tie rods for a trx 450r $89 for the pair acording to nyroc several people have used them with sucess stock tie rod end is aluminum not good 4 a 600lbs plus machine specialy with crazed rider on board

 

I also did the Tusk tie-rod ends but am now using the DiamondG ends. The DiamondG ends are better than the Tusk, tighter fit. IMO

 

well i just installed the trx 450 tie rods from tusk very well made but there a little to long i had to forceably spin them all the way in on the vise then install them there set at zero toe in seems to work fine on my little test ride steers easer

 

i actually had the same problem with the Diamond G rods and ends where i dont know if they were too long or just a very tight fit, but i to had to use a vise to turn the them. i actually couldnt get them at zero. i have slightly toed in a hair, but i havnt felt any wobble or pull with about 250 miles on them.