hey guys,

Just pulled my bike out of shed for 60 mile service and she starts up fine but when she warms up and I lower the choke down she stalls..cant get it to idle. bike idled fine before I put it away 4 months ago..I only use it for hunting and plowing the driveway.. anyone know how I can fix this..so far I changed sparkplug,oil,checked for kinked gas vent hose and air intake and airfilter.

ps. the bike sometimes would backfire(mostly in reverse) and would hesitate a little when i give it gas from a dead stop.

Thanks much. Nick z

 

continued....Bike will still stall no matter how high I turn the idle screw

 

sounds a bit early, but this is a very common problem on the 360, all ya need to do is adjust the valve's or more specificlly the exhaust vavle, it tightens up makes it run very very poor, had the same problem myself

 

I agree. Adjust your valves to the high end of the range - it should solve your problem.

 

Thanks guys. Thats what im going to do.