Kawasaki Discussions about Kawasaki ATVs.

03 Prairie 360 4x4 Paralyzed By Water

Thread Tools
 
Search this Thread
 
  #21  
Old 03-04-2007 | 06:17 PM
GR8Outdoorsman's Avatar
Trailblazer
Joined: Feb 2004
Posts: 68
Likes: 0
Default 03 Prairie 360 4x4 Paralyzed By Water

LOL..... This dude cracks me up..... STEVE seems to be the only smart @$$ on this post. He asked a question and people give their experiences and advice. In turn, he calls them all liars!!!! Hopefully he sticks with the Honda forum for here on out. Sounded like plugging a hole was too challenging of a feat. You know, an outboard motor would probably be a better fit!!!
 
  #22  
Old 03-04-2007 | 09:05 PM
jones7877's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2007
Posts: 4
Likes: 0
Default 03 Prairie 360 4x4 Paralyzed By Water

I will ask one final question only for the benefit of people considering buying one of these Kawasaki ATV's. All I ask is an honest answer for people who are going to lay down their hard earned dollar. Is their an OPEN vent tube that leads to the drive belt just below seat level that is routed in a way that would make it vulnerable to deep (not completely submerged) water and mud when the ATV is in the upright position? Answer this question however you like honestly or not. I really don't care I am just trying to save other people a headache. If you do know of a fix for this perhaps some type of after market snorkel please post it here. I am not downing this ATV it is a great machine it just has to stay out of the deep end where the big boys play! Thanks, Steve
 
  #23  
Old 03-05-2007 | 01:19 AM
jamakn's Avatar
Pro Rider
Joined: Oct 2005
Posts: 360
Likes: 0
Default 03 Prairie 360 4x4 Paralyzed By Water

Well Steve nice chattin'

I put this thing in some deep stuff with no issues.

One time I needed towing and it was due to water over the handle bars...

Hope your lovely Honda and you have a very honest relationship moving forward...


 
  #24  
Old 10-19-2007 | 10:11 PM
indi360's Avatar
Weekend Warrior
Joined: Oct 2007
Posts: 23
Likes: 0
Default 03 Prairie 360 4x4 Paralyzed By Water

Ok i came across this forum and thread... hi im new here... and after reading I have to comment... so now im a member [img]i/expressions/face-icon-small-smile.gif[/img]

TODAY less then 5 hours ago I rolled my 05 prairie 360 backwards down a creek embankment it flipped when it hit the watter askewed... and wound up a floater UPSIDE DOWN in the middle of the creek, bobbing for atleast 1 - 2 mins while i regained myself cursed and ran down into the creek to set her upright...

While upside down i vaguely remember the quad running... Things went fast and i was in pain so i dont know... however I flipped the quad over..... Started it in waist deep dater... and rode for over a mile in waist high water... we are talking a inch or 2 above seat height.....

At one point the quad was totally submerged at which time it shut off.....

I swam it down stream to where it was a bit more shallow and she started right up!!!!! I thought this quad was fried....

I then continued to ride it the remaining mile or so to a spot where i could easily get the quad out of the creek... I made it safely however my handlebar on the left side was bent down to the ground....

I rode on the trails home...... opened her up many times to try and push any water out that may have gotten in... no difference in performance... the ride home was atleast 2 - 3 miles additional.... during the ride i tested as best as i could with a bent bar my steering and handling.... everything seems great actually but im still worried.... I got home let her sit and went out multiple times to check systems and see if she starts right up and runs well... everything is A OK..

Can anyone tell me what I should do next? Everything seems fine so can i keep on riding? Literally the quad was under water upside down once...

and totally submerged right side up stalled and started back up another time... and then the long haul home in deep waters... my knee is busted up! lol but all i can think about is the quad!

what does everyone think?

Im amazed that i even have my quad at home, and i got to ride it there. When i saw it upside down bobbing in the water I totally was like there goes alot of dough.... im VERY VERY SURPRISED and impressed!

indi
 
  #25  
Old 10-22-2007 | 05:23 PM
94sport400L's Avatar
Range Rover
Joined: May 2005
Posts: 135
Likes: 0
Default 03 Prairie 360 4x4 Paralyzed By Water

I have a P300 and never had any problems with water in the clutch housing until a few weekends ago. Water was a little deeper than expected and went over the fenders and seat. Been in water up to the fenders previously but never had a problem. Couldnt move until i removed the plastic hose piece from the back and stood the quad up to drain what seemed to be a small pond from the housing. Ran without that tube for about 10 minutes, put it back on and was ready to ride again. Not sure why they didnt put a drain in them.
 
  #26  
Old 10-27-2007 | 08:52 PM
jamakn's Avatar
Pro Rider
Joined: Oct 2005
Posts: 360
Likes: 0
Default 03 Prairie 360 4x4 Paralyzed By Water

Indi,
Change your oil !!! like right away. Also, check your rear and make sure that gear oil isnt watered down. Once your sure she is dry, go beat the ***** of it!!!!
Wounds heel...but you'll remember and learn...soon enough, you'll be on a big unit!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Customer Service #1
Arctic Cat
73
05-15-2020 08:46 AM
ReconBayou
Kawasaki
4
10-16-2019 02:24 AM
hueby
Kawasaki
1
11-06-2015 11:34 AM
PrairieDog126
Kawasaki
2
09-12-2015 05:23 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 03 Prairie 360 4x4 Paralyzed By Water



All times are GMT -5. The time now is 02:46 PM.