wheelies!!!!!!
#1
how far can anyone ride a ***** on a Lakota sitting down on it and without hitting something
what's the best mod's for a lakota mine run's out to fast i can ride one about 15-20 yds pretty hard
is anyone's chain get loose quick it's hard to get it set right
what's the best mod's for a lakota mine run's out to fast i can ride one about 15-20 yds pretty hard
is anyone's chain get loose quick it's hard to get it set right
#3
Before any mods are done you will need to shift from 1st to 2nd but don't let the shifter down when going into 2nd. Rev the motor about 1/4 - 1/2 throttle then let shifter down. This will pop the front end up and from there it is just a matter of feathering the throttle and taping on the rear brake pedal to keep the front end up. I have gone approx. 75 yds before running out of room on mine.
#4
Dude, anything can be wheelied if you use the right technique. It is a combination of throttle control and rear brake. The only thing that will make you good is practice. You may want to plan on buying a new grab bar since practice will bring loop outs that scrape up or bend your stock grab bar.
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



