Bayou 300 Coil Starter
#1
Bayou 300 Coil Starter
Hi all, first post! I picked up a 95 Bayou with a few issues. One issue that is bothering me is it does not have a pull start on it. I am confused as how one will go on it as its pretty flat. I have attached a picture of the side of the bayou, and the picture of a starter I was going to purchase, but could someone tell me what else I am missing?
#2
Looks like your missing the starter pulley and bolt. https://www.kawasakipartshouse.com/o...recoil-starter
#3
#4
The recoil is similar to Polaris recoils and others. If the recoil is working right,pull the cord and you'll see a ratchet(pawl) arm extend out as it hits the yoke spring. The ratchet catches on the closest slot of the pulley to spin the engine over.Once you release the recoil rope the ratchet is pulled back in by a small spring attached to it. Look at the lower 4 parts of the recoil assembly shown in the parts breakdown I listed.
#5
Thread
Thread Starter
Forum
Replies
Last Post
Banshee2001BW
Kawasaki
0
09-28-2005 09:45 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)