mojave rebuild
#1
hi i was woundering about how hrd it would be to rebuild my mojave my self, with the help of my dad(X-auto mechanic) and would it be posible to put the 330(350,411 kit?) in my self also what else would i need to do to have it run right (valves,carb,gas,head mods,etc)
thanks for any help
Sean Chosewood
raged out 2000 mojave
thanks for any help
Sean Chosewood
raged out 2000 mojave
#2
#3
1-415-472-3195 mega cycle.
They offer a 11.5:1 piston and cam kit. They also have valve springs and retainers.
I believe it was $750 to do the hole kit your self. The only major cost is the mojave has a problem with pitting the rocker arm faces. This is a cost if yours are pitted.
Getting a rev limiter mod and a clamp on filter can be done down the road. This kit is very good.
The 330 kit I realy don't like on the moe because you have to bore the cases to accept the new sleeve. But it's a good kit, just take alot longer and the machine work can be costly.
They offer a 11.5:1 piston and cam kit. They also have valve springs and retainers.
I believe it was $750 to do the hole kit your self. The only major cost is the mojave has a problem with pitting the rocker arm faces. This is a cost if yours are pitted.
Getting a rev limiter mod and a clamp on filter can be done down the road. This kit is very good.
The 330 kit I realy don't like on the moe because you have to bore the cases to accept the new sleeve. But it's a good kit, just take alot longer and the machine work can be costly.
Thread
Thread Starter
Forum
Replies
Last Post
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)