'Clank' sound while in 4wd Low
#1
#3
#6
'Clank' sound while in 4wd Low
If it is the clanking sound of gears slipping, going by each other, than you need to adjust you linkage,
It happened to us, slipping under power, during one of the pulls, it made a clanking sound, then something let go, the bike wouldn't move unless you held the shifter forward in low range and we had no high range, (even though we were in low), only low and reverse.
Go to Nyroc site, he has lot's of information or check your manual, if you have one for adjustments.
As for the bike that broke, we haven't even taken it apart yet, to see what happened, it was the end of season and we have until May to deside on gear changes and or motor work.
It happened to us, slipping under power, during one of the pulls, it made a clanking sound, then something let go, the bike wouldn't move unless you held the shifter forward in low range and we had no high range, (even though we were in low), only low and reverse.
Go to Nyroc site, he has lot's of information or check your manual, if you have one for adjustments.
As for the bike that broke, we haven't even taken it apart yet, to see what happened, it was the end of season and we have until May to deside on gear changes and or motor work.
#7
Trending Topics
#9
#10
'Clank' sound while in 4wd Low
Raynist, my 650 just started doing this too. I am gonna adjust the linkage in the next couple of days as I am pretty sure that is the problem. My dealer told me that the 650 is probably gonna need a shifter linkage adjustment within 1000 kms. and he was right. Looked in my service manual and it is a no-brainer.