does anyone know if a the new warn winches=(3.0 i ) will work on the factory mounting brackets on the p360?

 

The bolt pattern for the 3.0 is the same as the A2500 and 2000. If it works for those warns it should work for the 3.0ci.

 

hey, thanks. was the 3.0 hard to wire? whats the best price you found the 3.0 for?

 

Check out this place

http://www.onlyatv.com/index.html

$360 plus $20 for shipping. The mount for my 650 was another $29 incldng shpping. Thats where I'm going to buy mine.

 

The bolt pattern is the same, Yes. The Style is different, as to where the drum full of wire is placed. The 3.0i's drum is actually centered on the whole system. Not like the SuperWinch(drum on the left) or the Warn 2000/2500(drum on the right). Mounting the Warn 2000/2500 with all the mounts from Kawi, flip the winch upside down to put the drum on the left like the SuperWinch.

I made a custom mount from the plate that comes with the Warn 3.0i and a 8" x 4" plate of 3/16" steel. It looks Quite Perfectly centered. The front obviously I had to mod a wee bit. I wanted the roller fairleed to be mounted to the frame like it looks it was made for. Only prob was the frame cutout and holes were to the left as youlook @ it. So I had to drill and cut a hole for the winch cable to go through. I'll have some pics soon if you guys would like.

Matthew

 

I just posted the winch 3.0i pics in my bio if you guys are interested as soon as it all gets approved.