26" bearclaw measurements, I got ahold of Kenda!!
#1
26" bearclaw measurements
Some people were inquiring on this so here it is: (Fronts are 26x9-10, Rears are 26x12-12)
Rear: 24 3/4" tall with 4.5 lbs. pressure
Front: 24 3/8" tall with 4 lbs. pressure
Lug Height Rear: 3/4"
Lug Height Front: 1/2"
Ground Clearance at bottom of rear diff., lowest point on right side: 8"
How does that compare to stock or yours? I never measured mine when it was stock.
Rear: 24 3/4" tall with 4.5 lbs. pressure
Front: 24 3/8" tall with 4 lbs. pressure
Lug Height Rear: 3/4"
Lug Height Front: 1/2"
Ground Clearance at bottom of rear diff., lowest point on right side: 8"
How does that compare to stock or yours? I never measured mine when it was stock.
#3
26" bearclaw measurements
Here's 25" Bear Claws. 25x8x12 F 25x10x12 R Brand new condition with about 2 hrs ridetime.
My tire pressure is also 4.0 F 4.5 R
ground clearence at rear diff guard: about 7.7 " I think stock is 7.6. Its more than 7.6 but not quite 7.75. A slight increase.
Rear 24" tall (I think Kenda needs to get a new tape measure)
Front 23.5" tall
Don't know how to measure lug height.
I would like to see 27" claws or 27" in another brand.
My tire pressure is also 4.0 F 4.5 R
ground clearence at rear diff guard: about 7.7 " I think stock is 7.6. Its more than 7.6 but not quite 7.75. A slight increase.
Rear 24" tall (I think Kenda needs to get a new tape measure)
Front 23.5" tall
Don't know how to measure lug height.
I would like to see 27" claws or 27" in another brand.
#5
#6
#7
Trending Topics
#9
26" bearclaw measurements
Measured a 26x12 " a few years back, pos measured about 25.4" if i remimber correctly with about 6 lbs of air at about 75 deg f. Size difference from the front tires on artic cat allmost tore front end out. I figure that they sell large dia. tires by pretending they are what they claim they are.
Their should be laws about missrepresenting tire sizes. And dont bother sending e mails to kenda, they dont reply.
buyer beware.
Their should be laws about missrepresenting tire sizes. And dont bother sending e mails to kenda, they dont reply.
buyer beware.
#10
26" bearclaw measurements
Well, just being curious I went out and put in 7 lbs. of air pressure on the rear tires and measured them. Since 7 lbs. is what they list as max operating pressure on the tire. I got 25 3/8". Still not 26" but closer. However, who runs 7 lbs. of air pressure in their tires... [img]i/expressions/face-icon-small-confused.gif[/img]