Just ordered the Penland Exhaust
#1
Just ordered the Penland Exhaust
It should be here in a few days I had it entirely apart ot do a spring cleaning and I did the vavles while it was apart and got to thinking this woudl be a good time to put hte new exhaust on it. It should be here in 5 to 7 days. I hope it is as great as every one is saying. For those of you who have the exhaust are you running the Dyno jet on the forth or fith notch? what jets?
#2
#3
#4
#5
Just ordered the Penland Exhaust
The jet size is the one that Dynojet suggests for the sub 5000 altitude with the most flow atributes.....it's in the kit, I just can't recall now! AHHHHHH!!!!!!!!!!! Brain Anyeurism!!!!!!!!!!!!!!!!
I believe the dealer also had to put the little spacers in there to get it right......seems a touch rich, but runs like it should.
I TOO AM WAITING ON THE CDI!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WhERE ARE YOU 9Cowman from copperC with the good news????????????????????
I believe the dealer also had to put the little spacers in there to get it right......seems a touch rich, but runs like it should.
I TOO AM WAITING ON THE CDI!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WhERE ARE YOU 9Cowman from copperC with the good news????????????????????
#6
Just ordered the Penland Exhaust
Montess,
You will get better performance from your stock jets than those DJ things as the stock jets are at least one size larger in volume than the largest DJ jet in the kit. If you go with a 142 and 145 Kiehin combo you will have a greatly improved system over those DJ jets guaranteed.
You will get better performance from your stock jets than those DJ things as the stock jets are at least one size larger in volume than the largest DJ jet in the kit. If you go with a 142 and 145 Kiehin combo you will have a greatly improved system over those DJ jets guaranteed.
#7
Just ordered the Penland Exhaust
I liked the difference the dyno jets made (I thought it made a difference) I may try goign back to the stock jets and running the dynojet needle like Nyroc is. It has seemed like it starts easier since i changed to the dyno jets ( but then again it could be me) Thanks alltoys. So how is your project coming.
Trending Topics
#8
#9
Just ordered the Penland Exhaust
I am running an HMF full exhaust system on mine and I have stayed witht he stock needles and just bought a 145 jet for the rear and moved the 142 to the front. I have yet to move my needles up any as with just the jetting and air screw adjustment my machine runs like *.*.*.*.*.*.*. which is enough to satisfy my speed desires. My next move is to upgrade my primary spring and see how the extra bite launches me as for now I can wheelie with any of them hehe.
I also run a KandN filter with the DG snorkle. The quad is easy to start and I have noticed I still get about 60 miles to a tank of fuel.
Hope this helps someone.........
I also run a KandN filter with the DG snorkle. The quad is easy to start and I have noticed I still get about 60 miles to a tank of fuel.
Hope this helps someone.........