badger pinion wrench
Oct 19, 2013 | 04:07 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Oct 2013
Posts: 1
Likes: 0
badger pinion wrench
I have a 92 yfm 80. I have factory service manual, but it does not show a special wrench part number to remove the lock ring that holds in the pinion bearing and gear. Any help with finding this tool would be great. The clowns at the dealership are no help.
Oct 20, 2013 | 08:20 AM
#2
Extreme Pro Rider
LT80 Expert
LT80 Expert
Joined: Mar 2001
Posts: 8,340
Likes: 33
Welcome to the forums. 
Looking at a fiche, it looks like what holds it is a big nut.
The nut has 4 notchs in it. This is where a special tool would be used.
I'd think a hammer and brass punch (or if need be a screwdriver) can be used to hit the notch to loosen it.
Hope that helps.
Looking at a fiche, it looks like what holds it is a big nut.
The nut has 4 notchs in it. This is where a special tool would be used.
I'd think a hammer and brass punch (or if need be a screwdriver) can be used to hit the notch to loosen it.
Hope that helps.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
