My daughters LT-80 broke the engine case supporting the rear axle. It looks like I'm going to have to replace the engine. Does anybody know of this failure? Is it common? Where can I find parts? Any Info on this would be a big help.Thanks.

 

For historical info, surf the following posts:

Link1
Link2
Link3 * Great info from LT80 in the 10th block of info within this one.

For another suggestion, try to contact LT80 (aka: Jack). His specialty is LT80s but also deals with high performance upgrades on E-Ton units. He's got many great ideas on how to make the LT80's cases better.

Hope this helps...

.

 

Spike has led you in the best direction

 

we broke 3 cases last year we got a new case from heitrick the cases they make now are made better plus i got him to reinforce it we havent broken it yet.also i think lt 80 welds them up he did our motor it flys but he's sometimes hard to reach.

 

Depending on the severity of the break, they can be fixxed and supported.My sons engine was in 2 pieces and we fixxed it and it never broke again.
Yes this does happen.Landing on one wheel is the main culprit. But there are other ways [img]i/expressions/face-icon-small-sad.gif[/img]
Any and every mini rider needs to learn how to ride smooth.No matter what brand they are riding.

 

had this prob on my sons 80 if you dont want to split the case you can have someone weld it back together without frying all the seals by welding it in water

 

the bracking of lt and kfx 80 cases is from jumping the thinges just a bit to big
with out making shore the bolts that hold the braket that holdes the axsel to the case are dune up the slightest movement will brack the case