Oil change for Eton Viper???
#2
Oil change for Eton Viper???
.
We have a Pred-90 that also has a CVT Tranny. To change the CVT Oil on our unit, I remove the tranny plug at the bottom, let the oil oil drain out, then squirt 7 ozs of Blue Polaris Gear Oil into the top plug of the tranny. Since the top hole is so small, using a small funnel is a "pain in the tail". Tonight, I purchase a little fluid injector tool. Looks like it might work better. For a visual, surf: - Press Here -
To check its oil level, I then check against its sight glass. For details, surf: - Press Here -
For your E-Ton unit, I'm sure its a simular process. However, I did read once that its Oil Injection tank bracket might be in the way. If I remember correctly, E-Ton uses a dip stick. Hopefully, an E-Ton owner can provide more details for you.
Hope this helps....
.
We have a Pred-90 that also has a CVT Tranny. To change the CVT Oil on our unit, I remove the tranny plug at the bottom, let the oil oil drain out, then squirt 7 ozs of Blue Polaris Gear Oil into the top plug of the tranny. Since the top hole is so small, using a small funnel is a "pain in the tail". Tonight, I purchase a little fluid injector tool. Looks like it might work better. For a visual, surf: - Press Here -
To check its oil level, I then check against its sight glass. For details, surf: - Press Here -
For your E-Ton unit, I'm sure its a simular process. However, I did read once that its Oil Injection tank bracket might be in the way. If I remember correctly, E-Ton uses a dip stick. Hopefully, an E-Ton owner can provide more details for you.
Hope this helps....
.
#3
#4
#5
Oil change for Eton Viper???
I just changed the oil in my kids Eton Viper 50. Drain the oil out of the plug to the bottom of the trans. Then get a 80-90w gear oil and a PUMP. The refill on mine was 100cc. I used ratio-rite to measure the 100cc of oil and then pumped it into the trans. Pretty simple operation really, take about 15 minutes. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)