kazuma 90 problem
#1
kazuma 90 problem
I have a kazuma mini falcon 90 that I can't get to start. MY daughter was riding it and went through some water and drowned it out. It started after it sat for a minute we then shut it off after that and it has not run since. we changed the oil the gas the plug. It is getting fuel to the carb it has spark but won't start. It has compression when you put your finger over the hole and turn it over. Any help would be appreciated. Could it have jumped a tooth on the cam???? any suggestions would be great
#5
kazuma 90 problem
on my mini talon, when it first went through water it did some weird stuff (hard starts, bog down, and die) after it took it apart and checked all electrical i found water in a few connections, applied deielectric grease and taped all connections. it can now run threw puddles with out issue.
so I guess what i'm saying is check your electrical just to rule it out... these bikes seem to have sensitive electrical systems.
hope this helps
so I guess what i'm saying is check your electrical just to rule it out... these bikes seem to have sensitive electrical systems.
hope this helps
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)