Sounds good, now it is time to hit the pilows. we will chat more at a later date. Thanks for the advice.

 

good night

 

FYI: the etons can be expieremented with less rollers but for the long term, the corect weights should be installed. They are spaced slightly different than the LT80's.
The LT rollers are about 10 grams each.

 

I was wondering, you guys run two less weights because of spacing. The Eton, running 6 I am wondering if I could only run 3 which would give it an even space. Whats you guys thoughts

 

dont think its a problem. (for testing) hey lt80 what you think grand pooba

 

3 is too little weight IMO.

 

Thank you for the advice

 

well now that I had some warm weather. I put the two rollers back in and it fixed the problem. now I cant keep the front end on the ground

 

Lean foward [img]i/expressions/face-icon-small-smile.gif[/img] When do we get a full report on that Moored LT80? Waiting & wondering & wishing mine where Moored [img]i/expressions/face-icon-small-smile.gif[/img]

 

had an issue with the sec. clutch. he is working on a brand new sec clutch. and hope to have it together this weekend. for the little time I rode it I decided to take off the duel a-arm kit. dint ride well. onething is if it runs as good as is sounds I will have to put the restricker plate back in. sounds like a rm80 .will begiving a full report when done