Panther 110CC
#1
Panther 110CC
I just purchased two Panther 110CC ATV's they went together like a charm and cranked on the first try. I am however having problems with getting them to go! They will idle perfectly and will rev up to wide open throttle but they act as if the clutch is slipping. Is this normal? and if so how long will it take for them to start breaking in? I would love help on how to adjust this problem as I have heard that these things will walk wheelies if adjusted correctly but these will hardly even move when you go wide open throttle. Thanks for any input!
#2
Join Date: Dec 2008
Location: Tracy, California, USA
Posts: 3,260
Likes: 0
Received 13 Likes
on
13 Posts
Panther 110CC
I don't have a 110cc machine, but I have read that there is an adjustment for the clutch. If all the 110cc machines are similar then mayber this manual will help:
http://www.adventureimports.co...x_files/ATV_manual.pdf
There is a section on adjusting the clutch in the manual
http://www.adventureimports.co...x_files/ATV_manual.pdf
There is a section on adjusting the clutch in the manual
#3
Panther 110CC
This did not help! It seems like there is no transfer of power from the motors to the rear wheels. It wants to go forward but it is very weak in doing so! Anyone have any suggestions on this? I also held the throttle wide open and the wheels would turn but not with much torque.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)