hi there

hopefully someone can help, friends kid has a warrir 110 chinese import quad. it had been running fine but now doesnt want to start. it has had a new coil and a new relay and a new battery. had a look at it today and now it isnt producing a spark. the manual is useless as it doesnt say anythin about the quad that is any use, not even the make of engine. the engine winds over fine but wont fire. any ideas anyone

 

Is the brake light on?
Is the kill switch on and working? (unplug connections and bypass switch)
Got gas?

 

Look at this thread for advice on troubleshooting an ignition system with no spark:

No Spark on 110cc (after a lot of other stuff)

You'll have to scroll way down to get to the "no spark" part (this thread got way off course from the original topic). Look for the picture of a CDI.

 

thanks for the replies will have another look at the bike tomoz and check the score with this in mind, many thanks

 

Thanks for the help, that link was really helpful. i disconnected the wire of the back of the kill witch and taped it back to the other wires. As soon as i did this i got a spark at the plug. i then checked the fuel system was ok and it started first time. many thanks.