Kids Quads Discussions about Kid's Quads and other ATV's.

Clutch question

Thread Tools
 
Search this Thread
 
Old Feb 14, 2018 | 01:00 PM
  #1  
BJBaum23's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2018
Posts: 6
Likes: 0
Default Clutch question

Hello all, I'm new here and don't know much about atvs other than what this forum and YouTube have taught me in the last couple weeks. I'll skip the whole story since I just gave the sob story in my intro section lol. I have a yerf dog 90cc 2 stroke quad that I got in parts from a neighbor but it's missing the crank case cover and clutch from what I've gathered. The brand is no longer around but from the research I've gathered the motor is made by monsoon and is essentially an Eton or dinli?? I believe it said. I can't find a clutch for the make and model anywhere. Are there universal or very specific? I found a website that has every part I've ever needed and they have clutches but I emailed them asking for input and they said without having the original clutch to go off of they can't help me. All I know is it has 16 teeth where it slides onto. Any help is greatly appreciated.
 
Reply
Old Feb 14, 2018 | 03:24 PM
  #2  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default

Similar to a lot of Taiwan and Chinese youth machines clutches. Here's a Yerf Dog site.Yerf-Dog along with a parts break pdf that may help.http://www.bmikarts.com/PDF/23000.pdf Others can probably help you further.
 
Reply
Old Feb 14, 2018 | 04:08 PM
  #3  
BJBaum23's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2018
Posts: 6
Likes: 0
Default

Originally Posted by old polaris tech
Similar to a lot of Taiwan and Chinese youth machines clutches. Here's a Yerf Dog site.Yerf-Dog along with a parts break pdf that may help.http://www.bmikarts.com/PDF/23000.pdf Others can probably help you further.
Thank you for reaching out, I've been there and even talked with them. They bought out all the old yerf dog parts but didn't have the clutch or the crankcase cover I need. The parts break down shows me the parts missing but that's it. The part numbers on there get me no where.
 
Reply
Old Feb 14, 2018 | 05:15 PM
  #4  
LT80's Avatar
Extreme Pro Rider
LT80 Expert
20 Year Member
Liked
Joined: Mar 2001
Posts: 8,340
Likes: 33
Default

I think the front and rear clutchs are the same on all of the scooter engines. There will be a difference in belts because of different models (length).
Mini quad fanatics (facebook), Those guys get stock stuff and pitch it, maybe a option there or advise you at least.
Hetrickracing.com can help also. Give Michelle a call.
 
Reply
Old Feb 14, 2018 | 05:28 PM
  #5  
BJBaum23's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2018
Posts: 6
Likes: 0
Default

Originally Posted by LT80
I think the front and rear clutchs are the same on all of the scooter engines. There will be a difference in belts because of different models (length).
Mini quad fanatics (facebook), Those guys get stock stuff and pitch it, maybe a option there or advise you at least.
Hetrickracing.com can help also. Give Michelle a call.
thank you so much I'll look into those 2
 
Reply
Old Feb 14, 2018 | 07:51 PM
  #6  
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
Default

If you can't find Yerf Dog specific parts you might check in to used/new Polaris,Eton,Aeon [parts as they supplied the same basic engine and clutch set ups. here's a few examples. https://www.ebay.com/itm/REAR-CLUTCH...-/291824051983
https://www.ebay.com/itm/NEW-Engine-...daC6~y&vxp=mtr
https://www.ebay.com/p/Clutch-Cover-...=nc&opts=opick
 
Reply
Old Feb 15, 2018 | 02:46 AM
  #7  
merryman's Avatar
Elite Pro Rider
10 Year Member
Liked
Joined: Oct 2013
Posts: 7,488
Likes: 387
From: Lancaster England
Default

Fairly sure Apache are still using that 90cc two stroke, may be worth trying their agents too.
 
Reply
Old Feb 15, 2018 | 01:20 PM
  #8  
BJBaum23's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2018
Posts: 6
Likes: 0
Default

Originally Posted by LT80
I think the front and rear clutchs are the same on all of the scooter engines. There will be a difference in belts because of different models (length).
Mini quad fanatics (facebook), Those guys get stock stuff and pitch it, maybe a option there or advise you at least.
Hetrickracing.com can help also. Give Michelle a call.
mini quad fanatics is awesome. Thank you for leading me there. I haven't found anything yet but the amount of outreach so far has been amazing and it looks like a couple people may have the parts to sell me. Thank you
 
Reply
Old Feb 15, 2018 | 05:49 PM
  #9  
LT80's Avatar
Extreme Pro Rider
LT80 Expert
20 Year Member
Liked
Joined: Mar 2001
Posts: 8,340
Likes: 33
Default

 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedEX
Honda
21
Aug 29, 2003 10:25 PM
maximus
Polaris
4
Feb 2, 2001 05:10 PM
Juvenile
Yamaha
1
Dec 21, 2000 10:07 AM
clindst
Polaris
2
Jan 28, 2000 12:28 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 12:59 AM.