Kids Quads Discussions about Kid's Quads and other ATV's.

Predator 90cc randomly bogs out

Thread Tools
 
Search this Thread
 
  #1  
Old 06-04-2018, 02:08 PM
Bwendt's Avatar
Weekend Warrior
Thread Starter
Join Date: Jun 2018
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Predator 90cc randomly bogs out

I recently bought a predator 90cc that runs great but randomly bogs out or seems to shut down usually going fast around a certain corner. Sometimes it will sputter and backfire once and then run fine for a while. When it is bogging out and I try to give it gas, it just bogs more. Sometimes it will kill but will start right up and run fine. I checked the spark plugs and it shows light tan, replaced the spark plug and coil and it didn't make a difference. It has an after market exhaust, air filter and the Jets have been changed to compensate. I have read a ton of post but wasn't sure ware to start as I haven't read one that's doing the same thing as mine. Any help would be much appreciated!
 
  #2  
Old 06-04-2018, 02:24 PM
DirtDevil101's Avatar
Pro Rider
Join Date: Oct 2015
Posts: 1,109
Likes: 0
Received 1 Like on 1 Post
Default

If the carb has a bowl it could be:
1) The wet float level is set too low...causing starvation when fuel demand is highest
2) Blockage somewhere not allowing enough fuel to the bowl...again causing starvation


At least that's what your symptoms are telling me...
 
  #3  
Old 06-05-2018, 06:48 AM
LT80's Avatar
Extreme Pro Rider
LT80 Expert
Join Date: Mar 2001
Posts: 8,342
Received 32 Likes on 31 Posts
Default

Yup, clean that carb.
 
  #4  
Old 06-05-2018, 08:10 AM
Bwendt's Avatar
Weekend Warrior
Thread Starter
Join Date: Jun 2018
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for replying to my post so fast! The first thing I did was clean he carb and had to put a bigger pilot jet in because it was back firing alot and the fuel mixture screw was turned in all the way. I will try to set the floats Tonite and see what happens.
 
  #5  
Old 06-05-2018, 03:58 PM
DirtDevil101's Avatar
Pro Rider
Join Date: Oct 2015
Posts: 1,109
Likes: 0
Received 1 Like on 1 Post
Default

So...generally...turning in the A/F screw leans out the mixture...turning it out richens it...so not sure your problem was main jet size...unless that machine is heavily modified I'd find out stock jet sizes and start there as a baseline (A/F screw out 2 to 2.5 turns from lightly seated)...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
firenemus
Polaris
13
05-04-2013 07:59 AM
jacob_royer
1) Engine problems..
17
12-23-2012 06:54 PM
Greene17
Yamaha
6
06-22-2011 04:38 PM
daniel776
Chinese Quads
8
09-01-2009 08:41 PM
polarispredator7678
Polaris
1
02-22-2007 08:08 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Predator 90cc randomly bogs out



All times are GMT -5. The time now is 07:09 PM.