My son has an lt-80, and I was wondering if they make exteneded a-arms for these little machines and where I might find them. Will the stock front shocks work? Are the front brake lines long enough? I tried "reversing" the front rims to make it a little more stable, but the valve stems hit[img]i/expressions/face-icon-small-disgusted.gif[/img]

 

You can get a widening kit from James Lucky for 149.00, it will make the front 6" wider,uses the stock shocks. Then put some spacers on the back, and it will be a lot more stable. Flipping the rims will work, you may have to put a valve stem hole on the outside,and plug the other hole with an inside out valve stem. Or you could see about those low profile valve stems that sit almost flush, check some parts catalogs for those.

 

Or you could get front spacers for a lot less $$$ [img]i/expressions/face-icon-small-wink.gif[/img]

 

Thanks for the replies I'll look into them[img]i/expressions/face-icon-small-smile.gif[/img] LT-80 I figured you to be at glamis for newyears..[img]i/expressions/face-icon-small-wink.gif[/img]

 

HEY DOOD! I wondered if that was you [img]i/expressions/face-icon-small-happy.gif[/img]
No Glamis,but leaving an hour ago <G> for Florida and the Quad Olympics.
Hope to see ya again tho [img]i/expressions/face-icon-small-smile.gif[/img] I haven't had lasagna for breakfast since[img]i/expressions/face-icon-small-cool.gif[/img]