Foneguy, those are older pictures where we didn't know any better. There was no snorkle on at that time, but I did open the airbox after a few trips like that and everything seemed ok. Not that those puddles were only inches deep, though. In later runs they went through a puddle about a half a foot to a foot deep and managed to introduce enough crud to badly score the piston and cylinder (hence the current oversized set). Until I find a perminant solution they are restricted from puddles. Since the kid who liked to splash the most is big enough to ride the adult sized ATV's the little one rarely sees mud anymore anyway.

 

i built my son one just took some tubing up by the gas tank, ill let u know how it does

 

My dad and I were going to use a dryer vent tube.We think this should work.[img]i/expressions/face-icon-small-cool.gif[/img]
I hope!!!!!!!!!!!!

 

Oh ya Ibroke my front rack at a weld any one ese do this???Any brake an A-arm doing jumps??? wach out SP90 rider that is how I broke my arm!! Its now fixedand Iam back riding

 

i cut off the 90 deg part on the ari intake tube, then put a ribbed 90 with 2 ft of 3/4 in clear tubing and flexed it up over the gas tank and under the plastic to concile it. looks olike it will work, runs fine with it on. also going to find a torn pair of tighties from my daughter to go over the inlet to act as a secondary filter. should do the trick ill find out next weekend after the rumble.

 

Yo bud thanks WE think we may go up by the handlebars to chanal it up with a ram air type thinge a bit above the rack. I am now going to get some big 22in tires on the back and 20 in front!![img]i/expressions/face-icon-small-happy.gif[/img]

 

let me know how the tires work out,,thats next for Johnathon.....[img]i/expressions/face-icon-small-cool.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img]